Event Type Event Description Segment Composition Product Notes ORU^R01 Unsolicited Observation Message MSH CWS PID { [ORC] OBR {[NTE]} { [OBX] {[NTE]} } } MSH = Message Header PID = Patient Identification ORC = Common Order OBR = Observation Request OBX = Observation/Result NTE = Note [ ] = optional { } = repetative "This interface does not support the standard convention used for field deletion (""""). It is assumed that all observation info on file is included in any messages transmitted." "At the panel level, if OBR(25 - result status) = 'X' then the panel data on file including all associated observations will be deleted from the system " "At the observation level, for any given OBX(3 - observation id), the OBX(11 - observation status) indicated in the first iteration of a multi-part observation will be considered to be the status for the entire observation in question. If the observation status = 'D' or 'X' or 'W' then all observation info related to the observation id in question will be deleted from the system." Field# Field Description ReqYN Length Table Attribute Note 1 Order Control Code Y 2 For results this should only be valued as 'RE' 2 Placer Order Number 22 3 Filler Order Number 22 4 Placer Group Number 22 5 Order Status 2 6 Response Flag 1 7 Quantity/Timing 200 8 Parent 200 9 Date/Time Of Transaction 26 10 Entered By 120 11 Verified By 120 12 Ordering Provider 120 13 Enterer's Location 80 14 Call Back Phone Number 40 15 Order Effective Date/Time 26 16 Order Control Code Reason 200 16.1 reason_for_test_code reason_for_test_value *** CALCULATED 16.3 reason_for_test_code_type 17 Entering Organization 60 18 Entering Device 60 19 Action By 120 20 Advance Beneficiary Notice Code 40 Field# Field Description ReqYN Length Table Attribute Note 1 Set - ID 4 2 Placer Order Number 22 2.1 placer_order_number 3 Filler Order Number 22 3.1 filler_order_number 4 Universal Service ID 200 4.1 universal_svc_id_code 4.2 universal_svc_id_value 4.3 universal_svc_id_code_typ 5 Priority 2 6 Requested Date/Time 26 7 Observation Date/Time 26 "Same as OBX(14). Use as default value when no value sent in OBX(14). Intent of this field is that it contains date/time of observation or, in the case of a specimen associated study, the date/time of specimen collection or receipt" 8 Observation End Date/Time 26 9 Collection Volume 20 10 Collector Identifier 60 11 Specimen Action Code 1 12 Danger Code 60 13 Relevant Clinical Info 300 relevant_clinical_info 14 Specimen Received Date/Time 26 specimen_received_date and specimen_received_time 15 Specimen Source 300 15.1 specimen_source_code specimen_source_value *** CALCULATED 16 Ordering Provider 80 16.1 ordering_provider ordering_provider_name *** CALCULATED 17 Order Callback Phone Number 40 18 Placer Field 1 60 19 Placer Field 2 60 20 Filler Field 1 60 21 Filler Field 2 60 22 Results Rpt/Status Change Date/Time 26 23 Charge To Practice 40 24 Diagnostic Serv Sect ID 10 diagnostic_service_code diagnositic_service_value *** CALCULATED 25 Result Status 1 If value is 'X' then ALL observations tied to to this 'filler order number' and 'universal service id' will be deleted from system. 26 Parent Result 400 27 Quantity/Timing 200 28 Results Copied To 150 29 Parent 150 30 Transportation Mode 20 31 Reason For Study 300 32 Principal Result Interpreter 200 33 Assisstant Result Interpreter 200 34 Technician 200 35 Transcriptionist 200 36 Scheduled Date/Time 26 37 Number Of Sample Containers 4 38 Transport Logistics 60 39 Collector's Comment 200 40 Transport Arrangement Responsibility 60 41 Transport Arranged 30 42 Escort Required 1 43 Planned Patient Transport Comment 200 44 Ordering Facility Name 60 45 Ordering Facility Address 106 46 Ordering Facility Phone 48 47 Ordering Provider Address 106 Field# Field Description ReqYN Length Table Attribute Note 1 Set - ID 4 2 Value Type 3 3 Observation Identifier 590 3.1 observation_id_code 3.2 observation_id_value 3.3 observation_id_type 4 Observation Sub-ID 20 observation_sub_id 5 Observation Value 64k observation_value 6 Units 60 6.1 observation_value_unit 7 Reference Range 60 obs_reference_range 8 Abnormal Flags 5 obs_abnormal_flag_code obs_abnormal_flag_value *** CALCULATED 9 Probability 5 10 Nature Of Abnormal Test 2 11 Observ Result Status 1 obs_result_status_code If value = 'D' or 'X' or 'W' then the specific record in question will be deleted from the system obs_result_status_value *** CALCULATED 12 Date Last Obs Normal Values 26 13 User Defined Access Checks 20 14 Date/Time Of The Observation 26 observation_date and observation_time Same as OBR(7). If no value given then the default will be OBR(7) else use OBX(14) 15 Producer's ID 60 16 Responsible Observer 80 responsible_observer 17 Observation Method 60